Ego starter kit Instruction

How to Fill Your Ego T Starter Kit:

Step 1 – Unscrew the base:

Turn the clearomizer upside down and unscrew the bottom section, which consists of the atomiser and the base.

Vape Starter Kit with t3S

Step 2 – Filling your clearomiser (glass section):

Turn the glass section upside down and squeeze the e-liquid in, to the top fill line or just below. Be careful not to overfill.

Step 3. Level out E Juice

Step 3 – Screwing the atomiser and base back on:

Screw the atomiser and base back onto the clearomiser, ensuring it is taut, but not too tight.   Then, screw the clearomiser back on to the battery, again ensuring it is a good fit, but not too tight. Allow your e-liquid to sit in the tank for 10 minutes so that the e-liquid soaks into the wick, otherwise you could destroy your atomiser.

E Juice Vape Pen

Step 1 – How to Turn your Ego-T on:

To check if your Ego T is on, press the power button down once, if it lights up then it is turned on. If you have no light showing it is turned off. To turn it on, simply press the button five times until it starts to flash.

eGo Battery Blinking

Step 2 – Press the Power Button and vape:

Now that your Ego T is on, you can take a slow controlled inhale whilst pressing and holding down the power button.  This will initiate the vaping process, once you have finished inhaling discontinue pressing the power button down.